Semi-synthetic molybdenum disulphide EP grease of outstanding adherence, water repellence and protective action. Specially indicated for bolts and, in general, any mechanism subject to very high stresses at low speeds and oscillations in extremely bad working conditions, as in the case of hydraulic hammer drills, crown gears, retros, loaders, dozers, excavators, etc.

ATLANTA extends significantly lubricating intervals, reducing the maintenance costs considerably.

It satisfies the ISO 6743-9-L-X-AEIB 2 and DIN 51825 KPF-2-P-10 standards and exceeds the recommendations of CATERPILLAR MPGM and JOHN DEERE MOLY HIGH TEMP EP GREASE.

 Approved by LIEBHERR.

Semi-synthetic molybdenum disulphide EP grease of outstanding adherence, water repellence and protective action.

   Multipurpose EP grease especially suitable for mechanisms, bushings and bearings subject to high load/stress and adverse working conditions. It possesses great adherence, excellent mechanical stability, water resistance and protective action.

Because of its special formulation, this multipurpose grease may be qualified as “Environmentally Friendly”.

It satisfies the specifications:

ISO 6743-9-L-X-BCHB 2

DIN 51825 KP-2K-20

KOMATSU

TAMROCK

Multipurpose EP grease especially suitable for mechanisms, bushings and bearings subject to high load/stress and adverse working conditions.

      VITALIA-BF grease has been specially developed for the lubrication of wheel bushes and electric brakes of cars, trucks, … and, in general, all types of rolling contact bearings. It is recommended for change intervals of around 1000000 km.

  Life performance, ASTM D-3527, (160ºC/1000 rpm.), 120 hours.

VITALIA-BF grease has been specially developed for the lubrication of wheel bushes and electric brakes of cars, trucks, … and, in general, all types of rolling contact bearings.

   Semi-synthetic grease suitable for mechanisms in contact with water. It has antiwear and extreme pressure properties, outstanding adherence, water repellence and sealing capacity. It is a non-toxic grease recognised by the Scientific Associates Inc. (St. Louis).

It satisfies the ISO 6743-9-L-X-BCIB 2 and DIN 51825 KPX-2G-20 standards.

Approved by LIEBHERR.

Semi-synthetic grease suitable for mechanisms in contact with water. It has antiwear and extreme pressure properties, outstanding adherence, water repellence and sealing capacity.

   Lithium grease with extreme pressure additives and molybdenum disulphide that has excellent mechanical resistance, notable protective and anti-wear properties.

   It satisfies the ISO 6743-9-L-X-BCEB 2 and DIN 51825 KPF-2M-20 standards.

Lithium grease with extreme pressure additives and molybdenum disulphide

   Micronised copper-laden grease suitable for lubricating picks and chisels of hydraulic breaking hammers and, in general, any part working in very aggressive atmospheres. We recommend it to be used for KRUPP, MONTABERT, ATLAS COPCO, INDECO and RAMMER drills among others.

Micronised copper-laden grease suitable for lubricating picks and chisels of hydraulic breaking hammers.

   Grease specially suitable for open and half-covered gears, subject to high temperatures and impact loads, with extraordinary adherence, high water-washing resistance and good wear and corrosion preventive properties. It can be applied with a brush or spray in a large variety of equipment including cement-ovens, ball and bar mills, port cranes and large crown gears in general.

   It satisfies the ISO 6743-9-L-X-BDHB 1 and ISO 6743-6:CKL standards.

Grease specially suitable for open and half-covered gears, subject to high temperatures and impact loads, with extraordinary adherence, high water-washing resistance and good wear and corrosion preventive properties.

   High performance semi-fluid aluminium complex grease, made of high viscosity base oil, specially designed for huge mill and kiln open gear drives for the cement and mining industry , specifically for service working conditions. It is an homogeneous grease, with optimal consistency to be applied through air-grease spray systems. However, it is also suitable to be applied by sump lubrication in older equipments.

   It satisfies the following standards and specifications:

High performance semi-fluid aluminium complex grease.

Lithium complex grease specially designed for the lubrication of bearings working under extreme load and vibration conditions. It presents an outstanding yield in machinery of great dimensions, as in the case of crushing mills bearings, sieves, supports of mills and rotating furnaces, laminating cylinders and all type of bearings where high vibrating and/or shock loads, temperature and water contamination are conjugated.

It satisfies the following specifications:

Lithium complex grease specially designed for the lubrication of bearings working under extreme load and vibration conditions.

   Water-insoluble, extreme pressure and micronised copper anti-seize compounds, specially recommended for rock drill machinery and for the centralised systems of final drawbar threads.

Water-insoluble, extreme pressure and micronised copper anti-seize compounds.

   Antiseize compound with very high content of micronised zinc powder that prevents seizure due to deformation or welding (at temperatures as high as 400ºC maximum). It is specially indicated for pneumatic drilling machinery, since it facilitates assembly and disassembly of the final threads of drill rods, bits and couplings.

Antiseize compound with very high content of micronised zinc powder that prevents seizure due to deformation or welding.